Filter
Top Products
GLOBAL ADMINISTRATOR SECTION CHAPTER 1: SYSTEM SCREEN
74 8E6 TECHNOLOGIES, PROXYBLOCKER USER GUIDE
Specify LAN Settings
1. In the Host Name field, enter up to 50 alphanumeric
characters for the name of the host for this server, such
as pba.LOGO.com.
2. Specify the following information, as necessary:
• In the LAN1 IP field of the IP/Mask Setting frame, the
default LAN 1 IP address is 1.2.3.3. Enter the IP
address and select the corresponding subnet mask of
the LAN1 network interface card to be used on the
network.
• In the LAN2 IP field, the default LAN 2 IP address is
1.2.3.4. Enter the IP address and select the corre-
sponding subnet mask of the LAN2 network interface
card to be used on the network.
TIP: Be sure to place the LAN1 and LAN2 IP addresses in
different subnets.
• In the Primary IP field of the DNS frame, the default IP
address is 4.2.2.1. Enter the IP address of the first
DNS server to be used for resolving the IP address of
the authentication server with the machine name of
that server.
• In the Secondary IP field of the DNS frame, the default
IP address is 4.2.2.2. Enter the IP address of the
second DNS server to be used for resolving the IP
address of the authentication server with the machine
name of that server.
• In the Gateway IP field of the Gateway frame, the
default IP address is 1.2.3.1. Enter the IP address of
the default router to be used for the entire network
segment.
3. Click Apply to apply your settings.
NOTE: Whenever modifications are made in this window, the
server must be restarted in order for the changes to take effect.