Filter
Top Products
24 Chapter 1
Power Management
Power Saving Mode Phenomenon
Standby Mode
Waiting time specified by the System Standby value or the
operating system elapses without any system activity.
Or
When the computer is about to enter Hibernation mode
(e.g., during a battery-low condition), but the Hibernation
file is invalid or not present.
The buzzer beeps
The Standby indicator lights up
Hibernation Mode
When customized functions for power management are
set to
Hibernation
and the corresponding action is taken.
All power shuts off
Display Standby Mode
Keyboard, built-in touchpad, and an external PS/2 pointing
device are idle for a specified period.
The display shuts off
Hard Disk Standby Mode
Hard disk is idle within a specified period of time.
Hard disk drive is in standby mode.
(spindle turned-off)
Environmental Requirements
Item Specification
Temperature
Operating +5 ~ +35 Degree C
Non-Operating -20 ~ + 60 Degree C
Humidity
Operating 20% ~ 80% RH, Non-condensing
Non-Operating 20% ~ 90% RH, Non-condensing
Vibration
Operating (Unpacked) 5 ~ 25.6 Hz, 0.38 mm
Non-Operating
Unpacked 5 ~ 27.1 Hz, 0.6G
27.1 ~ 50 Hz, 0.41 mm
50 ~ 500 Hz, 2G
Packed 5 ~ 62.6 Hz, 0.51 mm
62.6 ~ 500 Hz, 4 G
Mechanical Specifications
Item Specification
Dimensions 308mm x 257mm x 44.7mm
Weight 7lbs (Battery included)
I/O Ports Mouse, 1 Parallel, 1 Serial, 1 USB, 1 Modem Jack,
1 PCMCIA Slot, 1 VGA Port, 1 Microphone Jack, 1 Line-in Jack, 1
Line-out Jack
Drive Bays One 3.5” FDD, One CD-ROM
Material Plastic
Indications Power Light, Sleep Mode Light, Media Activity Light, Battery Charge
Light, Caps Lock Light, Numbers Lock Light
Switch Power
505-1.book Page 24 Thursday, November 4, 1999 4:36 PM