Filter
Top Products
48 Chapter 3
Disassembling the LCD
1.
Remove the two rubber LCD cushions and the 3 hinge screw caps from the LCD module.
2.
Remove the five screws from the LCD module, and snap out the LCD bezel.
3.
Then, remove it from the LCD module.
4.
Remove the two screws holding the LED board, and remove the LED board from the LCD panel.
5.
Disconnect the LED cable from the LED board.
6.
Remove the four screws holding the two LCD hinges, then remove the hinges.
505-1.book Page 48 Thursday, November 4, 1999 4:36 PM