Filter
Top Products
52 Chapter 3
2. Remove the screw shown here.
3. Remove the CD-ROM drive screw cap from the bottom of the main unit.
4. Remove the screw shown here.
5. Now, remove the floppy disk drive and CD-ROM drive combo module from the main unit.
Removing the Speakers
1. Disconnect the left and right speaker cables from the audio I/O and battery connection board at CN1 and
CN2 respectively.
2. Remove the four screws holding the two speakers, then remove the two speakers from the lower case.
505-1.book Page 52 Thursday, November 4, 1999 4:36 PM