Filter
Top Products
56 Chapter 3
Disassembling the Floppy Disk Drive and CD-ROM Combo Module
1.
To disassemble the CD-ROM drive from the combo module, first remove the three screws as shown here..
2.
Disconnect the CD-ROM FPC cable, then slide out the CD-ROM drive from the chassis.
3.
Remove the CD-ROM FPC cable from the chassis.
4.
To remove the floppy disk drive from the combo module, first remove the three screws as shown here.
5.
Remove the floppy disk drive from the chassis.
6.
Disconnect the floppy disk drive FPC cable from the floppy disk drive.
505-1.book Page 56 Thursday, November 4, 1999 4:36 PM