6 Troubleshooting
96
If you still encounter problems after going through the corrective measures, please
contact your dealer or an authorized service center for assistance. Some problems
may be solved using the BIOS Setup Utility. see “BIOS Utility” on page 79.
Missing operating system Follow these steps:
1. Press F2 (during POST) to enter the Setup Utility.
2. Exit the Setup Utility (saving the changes).
Non-system disk or disk
error. Replace and strike
any key when ready
Insert a system (bootable) diskette in the floppy drive
(A:), then press Enter to reboot.
Pointing Device Error Contact your dealer or an authorized service center.
Pointing Device Interface
Error
Contact your dealer or an authorized service center.
Protected Mode Test Fail Contact your dealer or an authorized service center.
RAM BIOS Bad Contact your dealer or an authorized service center.
RAM Parity Error Contact your dealer or an authorized service center.
Real-Time Clock Error Press F2 (during POST) to reconfigure the computer.
Video RAM BIOS Bad Contact your dealer or an authorized service center.
Error Messages Corrective Action