Filter
Top Products
xvi
Connecting the computer
Connecting the computer is as easy as 1-2-3.
1. Insert the battery pack into the battery compartment, then slide the battery
compartment cover in place.
Note
: When using a battery pack for the first time, fully recharge the battery,
then disconnect the adapter to use up the battery before recharging again.
Perform this action twice to condition the battery pack.
2. Connect one end of the AC adapter to the DC-in port on the computer’s rear
panel and the other end to a properly grounded power outlet.
3. Slide the display cover latch to the left to open the display. Slide the power
switch towards the rear of the computer then release it to turn on the power.