Filter
Top Products
Chapter 1 31
Removing and Dismantling the HDD Assembly
1. Partly peel off the mylar tape (1) and use it to pull the HDD assembly from its connector (2. SATA1).
2. Remove the HDD assembly from the main unit.
3. Remove the screws on the HDD module shielding.
Step Type Quantity Color Torque
3 M3 x L4 2 Silver 3 kgf-cm +/-15%
Acer Aspire 5910 SG.book Page 31 Tuesday, May 29, 2007 11:40 AM