Acer 5910 Laptop User Manual


 
Chapter 1 35
Removing the Processor
1. Use a flat screwdriver to turn the processor socket lock to the counter-clockwise to the unlock position
(note the unlock icon).
Torque value: 3 kgf-cm +/-15%
2. Partly peel off the processor bar code tape.
3. Hold the processor by its edges and remove it from its socket (U36).
IMPORTANT: When installing a processor, note the golden arrow on the corner to make sure the processor is
properly oriented over the socket. Refer to figure above.
Acer Aspire 5910 SG.book Page 35 Tuesday, May 29, 2007 11:40 AM