Filter
Top Products
38 Chapter 2
System Devices
The System Devices screen contains parameters involving your hardware devices. It also provides advanced
settings of the system.
The table below describes the parameters in the screen. Settings in
boldface
are the default and suggested
parameter settings.
Parameter Description Options
Serial Port Enables, disables or auto detects the serial port Disabled/Enabled/Auto
Parallel Port Enables, disables or auto detects the parallel port Disabled/Enabled/Auto
Mode Sets the operation mode if the parallel port Normal/Bi-directional/ECP/EPP
Base I/O address Set the base I/O address for the parallel port. 378h/278h/3BCh
Interrupt Set the interrupt for the parallel port IRQ 5/IRQ 7
DMA channel Set the DMA channel for the parallel port DMA 1/DMA 3
Television type Select TV standard NTSC/PAL
PS/2 Mouse Enables, disables or auto detects the PS/2
mouse
Disabled/Enabled/Auto Detect
Infrared Port (FIR) Enables, disables or auto detects the infrared
port
Disabled/Enabled/Auto
SG_TM800.book Page 38 Thursday, February 27, 2003 10:21 PM