Filter
Top Products
141
Screw types for rack installation
The following screws are used in the assembly of the Acer Altos G301
and other rack-mountable components.
Installing cage nuts
Cage nuts are use to secure systems and other components to the
vertical rails in the rack.
To install cage nuts:
1 Insert the lower lip of the cage nut over the bottom of the
opening at the back of a rail.
Screw type Figure Usage
1 #8-32 x 0.25 inch Securing the inner mounting
rails to the server tray
2 Hex head
#6-32 0.25 inch
Attaching the side handles to
the server
3M4 x L8
M4 nut
Securing the mounting
brackets to the inner sliding
piece
4 M6 x L10
Cage nut
Securing the cable carrier
and the mounting rails to the
rack
Supports the M6 metal
screws for securing server
components to the rack
aa300.book Page 141 Tuesday, December 17, 2002 5:27 PM