Filter
Top Products
Appendix C: Rack installation guide
148
11 Turn the Altos G301 on its side.
(1) Place the system on the server tray.
(2) Push the server to the back of the tray so it can be secured to
the tray.
12 Secure the server to the back of the server tray using the two
attached screws. To access this location, you may need to open the
back door of the rack.
Caution! To avoid personal injury, care should be taken when
pressing the component rail release latches and sliding the
component into the rack.
aa300.book Page 148 Tuesday, December 17, 2002 5:27 PM