Filter
Top Products
43
Installing and removing memory
modules
The four 184-pin sockets onboard support DDR SDRAM-type DIMMs.
You may install 128-MB, 256-MB, 512-MB, or 1-GB DIMMs for a
maximum of 4-GB system memory.
This system board supports DDR266 266MHz SDRAM.
Each of the DIMM socket is independent from the others. This
independence allows you to install DIMMs with different capacities to
form different configurations.
To install a DIMM, align it to an empty slot and press it in until the
holding clips secure the DIMM in place.
Note: The DIMM socket is slotted to ensure proper installation. If
you slip in a DIMM but it does not completely fit, you may have
inserted it the wrong way. Reverse the orientation of the DIMM.
aa300.book Page 43 Tuesday, December 17, 2002 5:27 PM