Filter
Top Products
1-30 User’s Guide
Table 1-4 System Error Messages
Message Action
Memory Error at:
MMMM:SSSS:OOO (W:XXXX,
R:YYYY)
where:
M: MB, S: Segment,
O: Offset,
X/Y: write/read pattern
Check DIMMs on the system
board. Contact your dealer.
Memory Size Mismatch
CPU Clock Mismatch
Check the memory size based
on the system specifications.
Check the internal cable
connections. If you are sure that
connections and values are
correct, ignore the message. If
the message reappears, ask for
technical assistance.
Onboard Serial Port 1 Conflict Run Setup and disable the port.
Onboard Serial Port 2 Conflict Run Setup and disable the port.
Onboard Parallel Port Conflict Run Setup and disable the port.
Pointing Device Error Check and connect pointing
device.
Pointing Device Interface
Error
Replace the pointing device or
contact your dealer.
Press F1 key to continue or
Ctrl-Alt-Esc for Setup
Press or
+ + to enter
Setup.
Real Time Clock Error Run Setup and set the time and
date.
Press Esc to turn off NMI, any
key to reboot
Press to disregard the NMI
error.
Press any other key to reboot the
system.