Filter
Top Products
Setup Utility 2-11
2.4 Disk Drives
Select Disk Drives to input configuration values for disk drives.
The following screen shows the Disk Drives menu:
Disk Drives
Diskette Drive A ................... [xx-MB, xx-inch]
Diskette Drive B ................... [ None ]
LS-120 Drive as .................... [ Normal ]
• IDE Primary Channel Master
• IDE Primary Channel Slave
• IDE Secondary Channel Master
• IDE Secondary Channel Slave
2.4.1 Floppy Drives
To enter the configuration value for the first floppy drive (drive A),
highlight the Floppy Drive A parameter. Press or key to view the
options and select the appropriate value.
Possible settings for the Floppy Drive parameters are:
• [ None ]
• [360 KB, 5.25-inch]
• [1.2 MB, 5.25-inch]
• [720 KB, 3.5-inch]
• [1.44 MB, 3.5-inch]
• [2.88 MB, 3.5-inch]
Follow the same procedure to configure floppy drive B. Choose None if
you do not have a second floppy drive.