Filter
Top Products
2-18 User’s Guide
IRQ
This function lets you assign an interrupt for serial ports 1 and 2. The
options for serial ports 1 are IRQ 4 and 11. The options for serial port 2
are IRQ 3 and 10.
The Base Address and IRQ parameters for
each port are configurable only if the port is
enabled.
2.5.2 Parallel Port
This parameter allows you to enable or disable the parallel port.
Base Address
This function lets you set a logical base address for the parallel port.
The options are:
• 3BCh • 378h • 278h
IRQ
This function lets you assign an interrupt for the parallel port. The
options are IRQ 5 and 7.
The Base Address and IRQ parameters are
configurable only if Parallel Port is enabled.
If you install an add-on card that has a parallel
port whose address conflicts with the onboard
parallel port, a warning appears on the screen.
Check the parallel port address of the add-on
card and change the address to one that does
not conflict.