Filter
Top Products
2-38 User’s Guide
7. Press Yes to save your settings and exit the Setup Utility. Your
password will be saved to CMOS.
For the password to take effect you must set jumper JP3 to 1-2 (Check
password):
1. Turn off and unplug the computer.
2. Open the computer housing and set JP3 to 1-2 (Check password)
to check the password function. See figure 1-2 for the location of
JP3.
3. Close your computer’s housing and reboot your system.
The next time you want to enter the BIOS utility, you must key in your
Setup password.
To remove your Setup Password:
1. Disable the Setup Password parameter in the System Security
menu by pressing the or
arrow key to select None.
2. Press to return to the System Security menu and then press
again to exit Setup. The Exit Setup screen appears:
Exit Setup
Settings have been changed.
Do you want to save to CMOS settings?
[Yes] [No]
3. Press Yes to save your settings and exit Setup Utility. Your
previous password will be removed from CMOS.