Filter
Top Products
2-20 User’s Guide
Onboard Device Settings
Floppy Disk Controller ........... [Enabled ]
IDE Controller ................... [Both ]
PS/2 Mouse Controller ............ [Enabled ]
USB Host Controller .............. [Disabled]
USB Legacy Mode ................ [--------]
SMBus Interrupt(IRQ9) ............ [Disabled]
Onboard Ethernet Chip ............ [Enabled ]
Floppy Disk Controller
This parameter lets you enable or disable the onboard floppy disk
controller.
IDE Controller
Set this parameter to Primary to enable only the primary IDE
controller; Both to enable both primary and secondary IDE controllers;
or Disabled to disable all IDE controllers.
PS/2 Mouse Controller
This parameter enables or disables the onboard PS/2 mouse controller.
USB Host Controller
This parameter lets you enable or disable the USB controller on board.
When enabled, it activates the USB function of the system. When
disabled, it deactivates the function.