Filter
Top Products
Setup Utility 2-33
ONBOARD LAN
When you set the PCI IRQ Setting parameter to Auto, this parameter
specifies the auto-assigned interrupt for the onboard LAN. If you set the
PCI IRQ Setting parameter to Manual, you need to specify the interrupt
that you want to assign for the onboard LAN installed in your system.
AGP
This item shows the assigned interrupt for the onboard accelerated
graphics port (AGP) controller.
PCI IRQ Sharing
Setting this parameter to Yes allows you to assign the same IRQ to two
different devices. To disable the feature, select No.
If there are no IRQs available to assign for the
remaining device function, we recommend that you
enable this parameter.
VGA Palette Snoop
This parameter permits you to use the palette snooping feature if you
installed more than one VGA card in the system.
The VGA palette snoop function allows the control palette register
(CPR) to manage and update the VGA RAM DAC (Digital Analog
Converter, a color data storage) of each VGA card installed in the
system. The snooping process lets the CPR send a signal to all the
VGA cards so that they can update their individual RAM DACs. The
signal goes through the cards continuously until all RAM DAC data has
been updated. This allows the display of multiple images on the
screen.
Some VGA cards have required settings for this
feature. Check your VGA card manual before