Filter
Top Products
2-32 User’s Guide
For system board without LAN
PnP/PCI Ooptions
PCI IRQ Setting ......... [ Auto ]
INTA INTB INTC INTD
PCI Slot 1 ............ [--] [--] [--] [--]
PCI Slot 2 ............ [--] [--] [--] [--]
PCI Slot 3 ............ [--] [--] [--] [--]
PCI Slot 4 ............ [--] [--] [--] [--]
PCI Slot 5 ............ [--] [--] [--] [--]
AGP ................... [--]
PCI IRQ Sharing ........... [No]
VGA Palette Snoop ........ [Disabled]
Graphics Aperture Size .... [64] MB
Plug and Play OS .......... [Yes]
Reset Resource Assignments [No ]
PCI IRQ Setting
Select Auto to let BIOS automatically configure the plug-and-play
(PnP) devices installed on your system. Otherwise, select Manual.
Refer to your manual for technical information about the
PCI card.
PCI SLOTS
When you set the PCI IRQ Setting parameter to Auto, these
parameters specify the auto-assigned interrupt for each of the PCI
devices. If you set the PCI IRQ Setting parameter to Manual, you need
to specify the interrupt that you want to assign for each PCI device
installed in your system.