Filter
Top Products
Setup Utility 2-17
2.5 Onboard Peripherals
The Onboard Peripheral Configuration allows you to configure the
onboard communication ports and the onboard devices. Selecting this
option displays the following screen:
Onboard Peripherals
Serial Port 1.................... [Enabled ]
Base Address.................. [3F8h]
IRQ........................... [4]
Serial Port 2.................... [Enabled ]
Base Address.................. [2F8h]
IRQ........................... [3]
Parallel Port.................... [Enabled ]
Base Address.................. [378h]
IRQ........................... [7]
Operation Mode................ [Standard]
ECP DMA Channel............. [-]
• Onboard Device Settings
2.5.1 Serial Ports 1 and 2
These parameters allow you to enable or disable serial ports 1 and 2.
Base Address
This function lets you set a logical base address for serial ports 1 and 2.
The options are:
• 3F8h • 2F8h • 3E8h • 2E8h