Filter
Top Products
5 Setup utility
96
Exit Setup
Examine the system configuration values. When you are satisfied that
all the values are correct, write them down. Store the recorded values
in a safe place. In the future, if the battery loses power or the CMOS
chip is damaged, you will know what values to enter when you rerun
Setup.
Press the Esc key to leave Setup. The following dialog box appears:
Use the arrow keys to select your response. Press the Enter key.
If you made any changes to the Setup utility, the dialog box below is
displayed.
Use the arrow keys to select your response.
Select Yes to save the changes in CMOS.
Select No to retain the previous configuration values.
Press the Enter key to exit.
aa r500.book Page 96 Thursday, September 20, 2001 11:06 AM