Filter
Top Products
5 Setup utility
72
System Sleep
Timer
This parameter sets the system to the
lowest power-saving mode after a speci-
fied period of inactivity. Any keyboard or
mouse action or any activity detected from
the IRQ channels resumes system opera-
tion.
Off
On
Sleep Mode Lets you specify the power-saving mode
that the system will enter after a specified
period of inactivity.
This parameter becomes configurable only
if the System Sleep Timer is on. Any key-
board or mouse action, or any enabled
monitored activities occurring through the
IRQ channels resume system operation.
Standby
Suspend
Power Switch
< 4 sec.
When set to Power off, the system auto-
matically turns off when the power switch
is pressed for less than 4 seconds. When
set to Suspend, the system enters the sus-
pend mode when the power switch is
pressed for less than 4 seconds.
Power off
Suspend
System Wake-
up Event
The system wake-up event allows the sys-
tem to resume operation when the modem
ring indicator is enabled.
Modem Ring
Indicator
When Enabled, any fax/modem activity
wakes up the system from suspend mode.
Enabled
Disabled
PCI Power
Management
Enables or disabled the PCI power
managment function
Enabled
Disabled
RTC Alarm Allows you to set a certain time on a cer-
tain day to wake-up your system from sus-
pend mode.
Disabled
Enabled
Resume
Day
If RTC alarm is enabled, the system will
resume operation on the day indicated
here.
User input
Resume
Time
If RTC alarm is enabled, the system will
resume operation at the time indicated
here.
User input
Parameter Description Option
aa r500.book Page 72 Thursday, September 20, 2001 11:06 AM