Filter
Top Products
Appendix A: ASM Pro quick installation guide
102
7The Password option is highlighted. Set up a password, and exit
the utility.
Note: A password is required when using the ASM Pro Console to
remotely change or set any values for the agent, such as threshold
values and any trap handling method. If the password is disabled,
there is no security protection for the agent when the Console
tries to change or set these values.
8 Reboot the system to activate the ASM Pro drivers.
Note: ASM Pro Server Agent automatically starts after the server
is restarted and running.
Installing the SCO OpenServer Agent
Note: Make sure the SNMP (Simple Network Management
Protocol) is configured properly.
ASM Pro Server Agent requires SNMP running with community set to
'public' . The IP address of ASM Pro Console should be in /etc/
snmpd.trap so that ASM Pro Console can communicate with ASM Pro
Server Agent.
Follow these steps to install the SCO Server Agent:
1 Insert the Management CD into your system’s CD-ROM drive.
2 Login SCO OpenServer as a super user.
3 In shell prompt, type the following to mount CD-ROM:
mount /dev/cd0 /mnt/cd.
4 In shell prompt, type:
ln -s /mnt/cd/APP/ASM/SCOOPE~1/ASMIPMI.DD /tmp/OL.000.000.
5 In shell prompt, type:
custom.
6 Follows custom command UI, select Software -> Install New ->
From ... -> Media Images -> /tmp.
aa r500.book Page 102 Thursday, September 20, 2001 11:06 AM