Filter
Top Products
MegaRAID SCSI 320-0 Hardware Guide 6-1
Copyright © 2002 by LSI Logic Corporation. All rights reserved.
Chapter 6
Hardware Installation
This chapter explains how to install the MegaRAID SCSI 320-0 controller.
It contains the following sections:
· Section 6.1, “Hardware Requirements”
· Section 6.2, “Installation Steps”
· Section 6.3, “Summary”
6.1 Hardware Requirements
You must have the following in order to install the MegaRAID SCSI 320-0
controller and create arrays:
· A host computer with the following:
– Special ZCR PCI expansion slot
– Installed LSI Logic 53C1030 SCSI chip
– Support for PCI version 2.2 or later
– Intel Pentium, Pentium Pro, or more powerful CPU
– Floppy drive, color monitor, VGA adapter card, mouse, and
keyboard
· The MegaRAID SCSI 320-0 Installation CD
· An Uninterruptible Power Supply (UPS) for the entire system
· Ultra320, Ultra, Fast SCSI 2 or Wide SCSI hard disk drives