Filter
Top Products
26 Chapter 1
Power Management
Power Saving Mode Phenomenon
Standby Mode
Waiting time specified by the
System Standby value or the
operating system elapses without
any system activity.
Closing the display cover
When the computer is about to
enter Hibernation mode (e.g.,
during a battery-low condition),
but the Hibernation file is invalid
or not present.
When customized functions for
power management are set to
Standby and the corresponding
action is taken.
Invoked by the operating system
power-saving modes.
The buzzer beeps
The Sleep indicator lights up
Hibernation Mode
When customized functions for
power management are set to
Hibernation and the
corresponding action is taken.
Invoked by the operating system
power-saving modes.
All power shuts off
Display Standby Mode
Keyboard, built-in touchpad, and an
external PS/2 pointing device are idle
for a specified period.
The display shuts off
Hard Disk Standby Mode
Hard disk is idle within a specified
period of time.
Hard disk drive is in standby mode.
(spindle turned off)
Environmental Requirements
Item Specification
Temperature
Operating +5 ~ +35°C
Non-operating -10 ~ +60°C
Non-operating -20 ~ +60°C (Storage package)
Humidity
Operating 20% ~ 80% RH, non-condensing
Non-operating 20% ~ 80% RH, non-condensing
Non-operating 20% ~ 90% RH, non-condensing (storage package)
Vibration
Operating (unpacked) 5 ~ 25.6 Hz: 0.38 mm (peak to peak)
25.6 ~ 250 Hz: 0.5G
Non-operating (unpacked) 5 ~ 27.1 Hz: 0.6G
27.1 Hz ~ 50 Hz: 0.4 mm (peak to peak)
50 ~ 500 Hz: 2.0G
Non-operating (packed) 5 ~ 62.6 Hz: 0.51 mm (peak to peak)
62.6 ~ 500 Hz: 4G