Filter
Top Products
42 Chapter 2
Full Test performs all test items in detail for your system.
Quick Test performs all test items quickly for your system.
The screen below appears if you select Multi Test.
Specify the desired number of tests and press Enter.
After you specify the number of tests to perform, the screen shows a list of test items (see below).
Move the highlight bar from one item to another. Press Space to enable or disable the item. Press Enter to
view the available options of each selected item. Press Esc to close the submenu.
The right corner screen information gives you the available function keys and the specified test number.
Space: Enables/disables the item
ESC: Exits the program
F1: Help
F2: Tests the selected item(s)
Enter: Opens the available options
Test Times: Indicates the number of tests to perform.
NOTE: The F1 and F2 keys function only after you finish configuring the Test option.
NOTE: When any errors are detected by diagnostic program, refer to “Index of PQA Diagnostic Error Code,
Message” on page 81 for troubleshooting.
PQA Vx_x xx-xx-xx
Diag
Result
SysInfo
Option
Exit
Diag
One TEST
Multi TEST
PQA Vx_x xx-xx-xx
Diag
Result
SysInfo
Option
Exit
Diag
ONE TEST
MULTI TEST
FULL TEST
QUICK TEST
TEST COUNT VALUE (1...9999) 1
PQA Vx_x xx-xx-xx
Diag
Result
SysInfo
Option
Exit
Diag
MANUAL TEST
AUTO TEST
Test Items
[ ] System Board
[ ] Memory
[ ] Keyboard
[ ] Video
[ ] Parallel Port
[ ] Serial Port
[ ] Diskette Drive
[ ] Hard Disk
[ ] CD-ROM
[ ] Coprocessor
[ ] Pointing Dev.
[ ] Cache
SPACE: mark/unmark selecting item
ESC : return to upper menu
F2 : test the marked item(s)
ENTER: open sub-item’s menu
Test Times = 1