Filter
Top Products
Peripherals and Options
59
External Monitor
You can connect an external monitor to the CRT
port (
) on the computer’s rear panel. See your
monitor manual for any additional instructions.
With an external monitor connected to the
computer, you can display your data on the
external monitor, the built-in display, or both
simultaneously. To switch between display
options, press Fn+F5.
Note: With an external monitor connected, the
computer will not enter suspend mode when you
close the display. To enter suspend mode,
disconnect the external monitor, and then open
and reclose the display.
Important! With an overhead projector or
presentation panel connected, be sure the Display
Always On parameter in the BIOS setup utility is
set to On. See page 96.