Filter
Top Products
System Utilities
90
The Hard Disk 1 entry is used when a CD-ROM
drive module or second IDE drive option is
installed in the module bay.
Num Lock After Boot
When set to Enabled, Num Lock After Boot tells
the computer to turn on Num Lock automatically
on startup, activating the keyboard’s embedded
numeric keypad. The default setting is Disabled.
LCD Expansion Mode
When set to Enabled, LCD Expansion Mode allows
full-screen views in DOS mode. The default setting
is Disabled.
Internal Speaker
This parameter lets you enable or disable the
internal speaker. The default setting is Enabled.
Tip: You can also toggle the speaker on and off
by pressing the speaker hot key combination
Fn+F7.
Silent Boot
When set to Enabled, the computer shows the
computer logo onscreen and hides the POST
routine messages. The default setting is Enabled.