Filter
Top Products
661 Brea Canyon Rd., Suite 3
Walnut, CA 91789
tel: 909.598.7388, fax: 909.598.0218
© Copyright 2005 Acnodes, Inc.
All rights reserved. Product description and product specifications
are subject to change without notice. For latest product information,
please visit Acnodes’ web site at www.acnodes.com.
RMC 7189
1U Rackmount System
DVD Drive Installation
The embedded system chassis includes a pre-installed DVD-ROM.
Installing or Replacing a DVD-ROM Drive
1. Power down the system and if necessary, remove the server from the rack and the front bezel from
the chassis.
2. Remove the chassis cover.
3. Unplug the drives power and data cables from the serverboard and/or back- plane.
4. If you are adding a new drive: Remove the mini-bezel (grate) from the drive bay The bezel can be
removed by pulling out the hard drive beneath the DVD-ROM, then pulling the mini-bezel forward.
If you are replacing a drive: Locate the locking tab at the rear (left hand side when viewed from the
front) of the DVD-ROM drive. Push the tab toward the drive and push the drive unit out the front of the
chassis.