Filter
Top Products
661 Brea Canyon Rd., Suite 3
Walnut, CA 91789
tel: 909.598.7388, fax: 909.598.0218
© Copyright 2005 Acnodes, Inc.
All rights reserved. Product description and product specifications
are subject to change without notice. For latest product information,
please visit Acnodes’ web site at www.acnodes.com.
RMC 7189
1U Rackmount System
o Event Sensor Number,
o Event Dir Type
oEvent Data.
Clear BMC System Event Log
Select OK and press the <Enter> key to clear the BMC system log. Select Cancel to keep the BMC
System log. The options are OK and Cancel.
Caution: Any cleared information is unrecoverable. Make absolutely sure that you no longer need
any data stored in the log before clearing the BMC Event Log.
XSet LAN Configuration
Set this feature to configure the IPMI LAN adapter with a network address as shown in the following
graphics.
Channel Number - Enter the channel number for the SET LAN Config com- mand. This is initially
set to [1]. Press "+" or "-" on your keyboard to change the Channel Number.
Channel Number Status - This feature returns the channel status for the Channel Number
selected above: "Channel Number is OK" or "Wrong Channel Number".
IP Address Source - This features allows the user to select how an IP address is assigned to a cli-
ent computer or network device. Select DHCP (Dynamic Host Configuration Protocol) to allow a
client (computer or device) obtains an IP address from a DHCP server that manages a pool of IP
addresses and network information on a "request and grant" basis. Upon time-out (or lease expira-
tion), the IP address assigned to the client can be reassigned to a new client. Select Static (Static
Allocation) to allow the host server to allocate an IP address based on a table containing MAC Ad-
dress/IP Address pairs that are manually entered (probably by a network administrator). Only clients
with a MAC address listed in the MAC/ IP Address Table will be assigned an IP address. The IP
Address allocated to the client is on a longer term basis than that assigned by the DHCP mentioned
in the other option. The options are DHCP and Static.
IP Address - The BIOS will automatically enter the IP address of this machine; however it may be
over-ridden. IP addresses are 6 two-digit hexadecimal numbers (Base 16, 0~ 9, A, B, C, D, E, F)
separated by dots. (i.e., 00.30.48.D0.D4.60).
Subnet Mask - Subnet masks tell the network which subnet this machine be- longs to. The value of
each three-digit number separated by dots should not exceed 255.