Filter
Top Products
661 Brea Canyon Rd., Suite 3
Walnut, CA 91789
tel: 909.598.7388, fax: 909.598.0218
© Copyright 2009 Acnodes, Inc.
All rights reserved. Product description and product specifications
are subject to change without notice. For latest product information,
please visit Acnodes’ web site at www.acnodes.com.
RMC 7189
1U Rackmount System
Memory Frequency
Use this option to force the system memory to run at a different frequency than the default frequency.
The available options are Auto, Force DDR-800, Force DDR-1066, and Force DDR-1333.
Memory Mode
The options are Independent, Channel Mirror, Lockstep and Sparing. Independent - All DIMMs are
available to the operating system.
Channel Mirror - The motherboard maintains two identical copies of all data in memory for redundancy.
Lockstep - The motherboard uses two areas of memory to run the same set of operations in parallel.
Sparing - A preset threshold of correctable errors is used to trigger fail-over. The spare memory is put
online and used as active memory in place of the failed memory.
Demand Scrubbing
Demand Scrubbing is a process that allows the North Bridge to correct correctable memory errors
found on a memory module. When the CPU or I/O issues a demand- read command, and the read
data from memory turns out to be a correctable error, the error is corrected and sent to the requestor
(the original source). Memory is updated as well. Select Enabled to use Demand Scrubbing for ECC
memory cor- rection. The options are Enabled and Disabled.
Patrol Scrubbing
A memory error-correction scheme that works in the background looking for and correcting resident
errors. The options are Enabled and Disabled.
Throttling - Open Loop
Throttling improves reliability and reduces power in the processor by automatic voltage control during
processor idle states. Available options are Disabled and Enabled. If Enabled, the following items will
appear:
Hysteresis Temperature (This feature is available when Closed Loop is enabled.)
Temperature Hysteresis is the temperature lag (in degrees Celsius) after the set DIMM temperature
threshold is reached before Closed Loop Throttling begins. The options are Disabled, 1.5oC, 3.0oC,
and 6.0oC.
Guardband Temperature (This feature is available when Closed Loop is enabled.)
This is the temperature which applies to the DIMM temperature threshold. Each step is in 0.5oC incre-
ment. The default is [006]. Press "+" or "-" on your keyboard to change this value.