Filter
Top Products
661 Brea Canyon Rd., Suite 3
Walnut, CA 91789
tel: 909.598.7388, fax: 909.598.0218
© Copyright 2009 Acnodes, Inc.
All rights reserved. Product description and product specifications
are subject to change without notice. For latest product information,
please visit Acnodes’ web site at www.acnodes.com.
RMC 7189
1U Rackmount System
Appendix B Installing the Windows
After all hardware components have been installed, you must first configure Intel South Bridge RAID
Settings before you install the Windows OS and other software drivers. To configure RAID settings,
please refer to RAID Configuration User Guides.
B-1 Installing Windows OS for a RAID System
1. Insert Microsoft's Windows XP/2003/2008/Vista Setup CD in the CD drive, and the system will
start booting up from CD.
2. Press the <F6> key when the message "Press F6 if you need to install a third party SCSI or RAID
driver" displays.
3. When the Windows OS Setup screen appears, press "S" to specify additional device(s).
4. Insert the driver diskette "Intel AA RAID Windows XP/2003/2008/Vista Driver for ICH10R" into the
floppy drive and press the <Enter> key.
5. Choose the Intel(R) ICH10R SATA RAID Controller from the list indicated in the Windows OS
Setup Screen, and press the <Enter> key.
6. Press the <Enter> key to continue the installation process. (If you need to specify any additional
devices to be installed, do so at this time.) Once all devices are specified, press the <Enter> key to
continue with the installation.
7. From the Windows OS Setup screen, press the <Enter> key. The Windows OS Setup will auto-
matically load all device files and then, continue the Win- dows OS installation.
8. After the Windows OS Installation is complete, the system will automatically reboot.