Filter
Top Products
41
Bn Communication Standard Setting
This command allows you to choose between CCITT and Bell standard.
dnammoCtceffE
0B
0021tasimedomehtnehwedom22.VTTICCstceleS
.s/stib
1B
s/stib0021tasimedomehtnehwA212lleBstceleS
.)tluafed(
2B.)3Bsaemas(lennahcesrever32VstcelesnU
3B.)2Bsaemas(lennahcesrever32VstcelesnU
51B.s/stib003tasimedomehtnehw12.VstceleS
61B
s/stib003tasimedomehtnehwJ301lleBstceleS
.)tluafed(
Result Codes:
KO61,51,1,0=n
RORREesiwrehtO
Cn Carrier Control
The modem will accept the C1 command without error in order to ensure backward
compatibility with communications software that issues the C1 command. However,
this modem does not support the C0 command. The C0 command may instruct
some other modems to not send a carrier, in effect putting them in a receive-only
mode.
dnammoCtceffE
0C.ffosyawlareirractimsnarT
1C.gnihctiwsreirractimsnartlamroN
Result Codes:
KO1=n
RORREesiwrehtO