Filter
Top Products
51
&Dn DTR Control
This command interprets how the modem responds to the state of the DTR signal
and changes to the DTR signal.
dnammoCtceffE
0D&
dnaRTDfosutatseurtehtserongimedomehT.erongI
ruoyfidesuebylnodluohssihT.nosyawlasatistaert
.medomehtotRTDedivorptonseodretupmoc
1D&
atadenil-nonielihwdetcetedtonsilangisRTDehtfI
KOseussi,edomdnammocsretnemedomeht,edom
.detcennocsniamerdna,edoctluser
2D&
atadenil-nonielihwdetcetedtonsilangisRTDehtfI
silangissihtfI.)tluafed(stcennocsidmedomeht,edom
.laidrorewsnatonlliwmedomeht,tneserpton
3D&
,srucconoitisnartffo-ot-nonanehwlangisRTDrotinoM
ZTAehtfisatesertfosasmrofrepmedomeht
.deviecersawdnammoc
Result Codes:
KO
,2,1,0=n
3
RORREesiwrehtO
&Fn Load Factory Settings
This command loads the configuration stored and programmed at the factory. This
operation replaces all of the command options and the S-register settings in the ac-
tive configuration with factory values.
dnammoCtceffE
0F&)tluafed(.noitarugifnocevitcasagnittesyrotcafllaceR
&Gn V.22bis Guard Tone Control
This command determines which guard tone, if any, to transmit while transmitting
in the high band (answer mode). This command is only used in V.22 and V.22bis
mode. This option is not used in North America and is for international use only.
dnammoCtceffE
0G&.)tluafed(delbasidenotdrauG
1G&.zH055otenotdraugsteS
2G&.zH0081otenotdraugsteS