Filter
Top Products
46
On Return On-line to Data Mode
dnammoCtceffE
0O
dnaedomdnammocenil-notixeotmedomehtstcurtsnI
.)+++,ecneuqeSepacsETAees(edomatadotnruter
1O
-nootgninrutererofebniarteraseussidnammocsihT
.edomatadenil
3O
erofebnoitaitogeneretaraseussidnammocsihT
.edomatadenilnootgninruter
Result Codes:
KO3,1,0=n
RORREesiwrehtO
P Select Pulse Dialing
This command configures the modem for pulse (non-touch-tone) dialing. Dialed
digits are pulsed until a T command or dial modifier is received. Tone dial is the
default setting.
Qn Result Code Control
Result codes are informational messages sent from the modem and displayed on your
monitor. Basic result codes are OK, CONNECT, RING, NO CARRIER, and ER-
ROR. The ATQ command allows the user to turn result codes on or off.
dnammoCtceffE
0Q
retupmocehtotsedoctluserdnesotmedomselbanE
.)tluafed(
1Q
ehtotsedoctlusergnidnesmorfmedomselbasiD
.retupmoc
Result Codes:
KO1,0=n
RORREesiwrehtO