58
Result Codes:
KO0=n
RORREesiwrehtO
\J Adjust Bits/s Rate Control
When this feature is enabled, the modem emulates the behavior of modems that
force the DTE interface to the line speed.
dnammoCtceffE
0J\.)tluafed(erutaefffonruT
1J\.erutaefnonruT
Result Codes:
KO1,0=n
RORREesiwrehtO
\Kn Break Control
Controls the response of the modem to a break received from the DTE or the remote
modem or the \B command. The response is different in three separate states. The
first state is where the modem receives a break from the DTE when the modem is
operating in data transfer mode:
dnammoCtceffE
0K\
ehtottneskaerbon,edomdnammocenil-noretnE
.medometomer
1K\.medometomerotkaerbdnesdnasreffubatadraelC
2K\.0saemaS
3K\.yletaidemmimedometomerotkaerbdneS
4K\.0saemaS
5K\
htiwecneuqesnimedometomerotkaerbdneS
).tluafeD(.ataddettimsnart