Filter
Top Products
46
Actiontec 54 Mbps Wireless Multiport Print Server User Manual
47
Chapter 4 Using the Web Administrator
7. In next Wizard screen, the user can configure the Print Server to automatically
get its IP address from the network’s DHCP server, or manually specify a static
IP address. To configure the Print Server to automatically get an IP address
from the network’s DHCP server, activate “Enable Obtain TCP/IP settings
automatically.” To manual assign an IP address, activate “Disable Use the fol-
lowing TCP/IP settings” then enter “IP Address,” “Subnet Mask,” and “Gateway”
addresses for the Print Server. Also, the Print Server’s DHCP server can be
enabled or disabled from this screen. When finished, click Save & Next.
8. In next Wizard screen, the SMB settings of the Print Server can be changed.
When finished, click Save & Next.