Adaptec AMM-1572 Network Card User Manual


 
2-9
Configuring the AMM-1570/1572
AMM-1570/1572 User’s Guide
Stock Number: 510526-00, Rev. B Page: 2-9
Print Spec Number: 492379-00
Current Date: 3/7/94 ECN Date: 3/8/94
Note: Always refer to the documentation provided with
your system for instructions on adding and configuring
adapter boards.
1
Jumper blocks J6 and J9 are both used to determine the Interrupt Channel (IRQ). The appropriate pin
pairs on J6 and J9 must be configured to the same IRQ.
Description Default Setting Jumper Block
Int 19h Reroute Int 19h J5
Fast SCSI Operation Disabled J5
Synchronous Negotiation Disabled J5
SCSI Disconnection Enabled J5
Floptical Drive Support Disabled J5
Extended Translation for Drives > 1GByte Disabled J5
Host Adapter SCSI ID 7 J6
Interrupt Channel (IRQ) 11 J6, J9
1
SCSI Parity Checking Enabled J6
Floppy Disk Controller (AMM-1572 only) Enabled J7
I/O Port Address 340h - 35Eh J9
BIOS Base Address DC000h - DFFFFh J9
Host Adapter BIOS Enabled J9
Sound Chip Base Address 220h J17
Host Adapter Terminators Installed