Adaptec AMM-1572 Network Card User Manual


 
3-20
AMM-1570/1572 User’s Guide
AMM-1570/1572 User’s Guide
Stock Number: 510526-00, Rev. B Page: 3-20
Print Spec Number: 492379-00
Current Date: 3/7/94 ECN Date: 3/8/94
Before Restarting Your System
Before restarting your system and configuring your host adapter,
make sure the following is completed:
The SCSI bus is properly terminated.
Each SCSI device on the SCSI bus is set to a unique SCSI ID
(0-7).
The host adapter is firmly seated and secured in the expansion
bus slot.
Internal SCSI devices are connected to the host adapter with a
50-pin SCSI ribbon cable and that proper Pin 1 orientation is
maintained.
External SCSI devices are cabled to the host adapter with
50-pin shielded cables.
If using the onboard floppy controller on the AMM-1572, the
floppy diskette drive is connected to the host adapter with the
34-pin floppy ribbon cable and that proper Pin 1 orientation is
maintained.
All system and power cables are properly connected.
Reassemble the System
Refer to your system and SCSI device documentation to replace the
system cover and connect all system and SCSI device power cables.
Your computer and host adapter are now ready to use.