Filter
Top Products
107
Installing the Battery
Backup Unit
The battery backup unit (BBU) for the RAID controller is
installed on the ACM unit (see Figure D-1).
Figure D-1 Location of Battery Backup Unit on ACM
Follow this procedure to install the Battery Backup Unit
(BBU):
1 Remove the ACM from the enclosure by loosening the two
ACM screws and using the handle, slide the ACM out of the
enclosure.
2 Lay the ACM on a flat surface as in Figure D-1 above.
3 Orient the BBU as shown (see Figure D-2).
ACM Assembly
BBU goes here