Adaptec MAN-FC2002-001 Computer Drive User Manual


 
Power Supply LEDs
71
Power Supply LEDs
The 2Gb SANbloc Series uses two AC power supplies. The
AC power supplies provide 853W peak output power and
673W continuous output power.
The 2Gb SANbloc Series power supply has two LED
indicators on it, which are visible from the rear of the
enclosure. The green Power OK LED is on when the power
supply is operating normally. This green LED is driven by
the power supply, and indicates that the power supply output
voltages are operating normally. The power supply amber
Fault LED is driven by the LS Module and power supply.
This amber LED is ON when the LS Module detects a power
supply fault, or it will flash, when the power supply Locate
feature is selected.
Note: The audible alarm will sound when an error is detected
Figure 5-3 Power Supply LEDs
0
I
Fault LED
Power OK