Filter
Top Products
RAID Controller LEDs
73
RAID Controller LEDs
The RAID controller has 7 LEDs located and numbered as
shown.
Figure 5-5 RAID controller LEDs
The table below describes the LEDs meaning.
Table 5-3 Controller Status LEDs
LED Description
1 Yellow - Not Ready. Normally Off. Goes On during
power up sequence.
2 Green - Ready. Normally On
3 Green - Dirty Cache. On when there is data in cache.
4 Yellow - BBU Fault. Normally Off.
5 Green - Partner Fail. Normally Off
6 Green - Device Activity i.e. on drive channels. Flashes
with activity.
7 Green - Host Activity. Flashes with activity.
1
2
3
4
5
6
7
FC Host Connectors (SSF optical)
HSSDC Connector
Ethernet Connection
RS232
Status LEDs