Filter
Top Products
iDP-3410 User’s Manual
ESC "U" n
[Function] Specifying/Canceling the Unidirectional print mode
[Code] <1B>H <55>H
[Range] 0 ≤ n ≤ 255
[Outline] This command selects/deselects unidirectional print. n is valid only for the least significant
bit.
n Function
0 Deselects
1 Selects
[Caution] If unidirectional print is selected, the printer will print from the left to the right. When you
want to prevent horizontal shear in printing at high accuracy, specify unidirectional print with
this command. (Double height print, etc.)
ESC "c" "5" n
[Function] Selecting the panel switch enable/disable
[Code] <1B>H <63>H <35>H n
[Range] 0 ≤ n ≤ 255
[Outline] This command enables/disables the panel switches. n is valid only for the least significant
bit.
Setting n = 1 disables the panel switches.
Setting n = 0 enables the panel switches.
[Caution] If the panel switches are disabled with this command, the LF switch will be disabled.
Therefore, the paper cannot be fed by the LF switch.