Filter
Top Products
iDP-3410 User’s Manual
4.2 Connecting Interface Cable
(1) Turn off the power. (Mating side included)
(2) Check the top and bottom of the cable terminals, and connect to the interface connector.
(3) Fix the cable terminals.
•Serial Interface: Tighten screws, to fix.
•Parallel Interface: Turn a stopper, to fix.
(4)Connect the cable to a computer.
4.3 Connecting Drawer Kick-Out Connector
(1) Turn off the power.
(2) Check the top and bottom of the drawer kick-out cable connector, and connect it to the drawer kick-out
connector located on the back of the printer.
(3) Screw the grounding cable of the drawer to the grounding terminal of the printer.
CAUTION : Connect only the prescribed drawer (Solenoid) to the drawer kick-out
connector.