Filter
Top Products
iDP-3410 User’s Manual
ESC "{ " n
[Function] Specifying/Canceling the inverted character print
[Code] <1B>H <7B>H n
[Range] 0 ≤ n ≤ 255
[Outline] This command selects/deselects inverted print. n is valid only for the least significant bit.
n Type
0 Deselects the inverted characters.
1 Selects the inverted characters.
[Caution] This command is valid only if entered at the head of the line.
[Default] n = 0 <Example>
ESC "⁄" n "data" CR or LF
[Function] Defining the message
[Code] <1B>H <2F>H n “data” CR or LF
[Range] 1 ≤ n ≤ 10
[Outline] This command defines up to a 50-byte message in one line. If the value of n is specified
beyond the range, the data following n will be treated as the print data.
Once the message is defined, it remains valid until it is redefined. The data should end with
CR (0DH) or LF (0AH). If the data exceeds 50 bytes, the subsequent data will be treated as
the print data.
Once the message is defined, it remains valid until it is redefined or the download deletion
command (ESC DC2 n1 n2) is executed.
When Inverted Print Is
Deselected
When Inverted Print Is
Selected
Print
Direction