Filter
Top Products
Installing VolServ
601351 Rev A Installation Procedures 2-3
Installation
Procedures
Distribution
Media
The VolServ distribution CD contains:
• Information describing the release
• A script file to perform installation
• One or more data files to be installed
The installation process involves verifying the header file and
loading and executing the installation script file. The script
controls the remainder of the installation process.
Running the
Installation
Script
Installing VolServ takes approximately 30 minutes.
The following procedure includes the prompts issued by the
installation script. The lines and prompts issued by the script are
shown in Courier font.
• If <RETURN> is pressed without an entry, the default
answer shown in less than (<) or greater than (>) symbols, is
used in invoking the installation script.
• Press <RETURN> after keying in each value.
The script performs the following operations:
• Distributes the VolServ command executable files and
support files (internal, system parameter, syslog, etc.) into
the default system directories.
• Interactively initializes the parameter files consisting of
system configuration parameters and system defaults.
The installation script copies software files from the installation
CD into the appropriate directories. The script initializes the
system configuration and default parameters that are used by
the software packages.