Filter
Top Products
Installing VolServ
3-12 Post Installation Tasks 601351 Rev A
An OK prompt will appear on the desktop, not in a
CDE window.
Step 8. Reboot the Solaris host machine using boot -r to
force re-configuration of hardware devices. This will
create the device node required for the attached
library.
Be prepared to immediately do another STOP-A
sequence as soon as the memory checks starts (this is
when you see the cursor spin activity with the
characters '\' '-' '/', etc. without moving position).
This will abort the boot and return to the OK prompt.
Step 9. Enter probe-scsi-all at the OK prompt.
The output will identify all SCSI connected devices.
The following is an example output on a Scalar 10K
with two LTO drives.:
Step 10. At the OK prompt, enter boot to reboot the system.
ok probe-scsi-all
/pci@1f,0/pci5/scsi@2
<Name of controller card>
=========================
PCI Single Channel LVD HBA
SCSI-ID 7
--------------------------
Target 0
Unit 0 Removable Tape IBM ULTRIUM-TD1 16E0
Target 1
Unit 0 Removable Tape IBM ULTRIUM-TD1 16E0
Target 6
Unit 0 Removable Device type 8 ADIC Scalar 10K 120A
ok