Filter
Top Products
Installing VolServ
601351 Rev A Post Installation Tasks 3-11
Post Installation
Tasks
Step 6. Edit the /kernel/drv/sgen.conf file as shown
below.
The lines beginning with a # are comments. The lines can be
un-commented out but the line corresponding to the known
target ID of the connected SCSI library MUST NOT be
commented out.
Additionally, the lines
device-type-config-list="changer"; and
inquiry-config-list= "ADIC","*"; MUST be added to
this file to support ADIC Media Changers (libraries).
Step 7. Access an OK prompt by simultaneously pressing
the STOP key and the A key from a terminal
window.
-----------------------------------------
name="sgen" class="scsi" target=0 lun=0;
name="sgen" class="scsi" target=1 lun=0;
name="sgen" class="scsi" target=2 lun=0;
name="sgen" class="scsi" target=3 lun=0;
name="sgen" class="scsi" target=4 lun=0;
name="sgen" class="scsi" target=5 lun=0;
name="sgen" class="scsi" target=6 lun=0;
name="sgen" class="scsi" target=7 lun=0;
#name="sgen" class="scsi" target=8 lun=0;
#name="sgen" class="scsi" target=9 lun=0;
#name="sgen" class="scsi" target=10 lun=0;
#name="sgen" class="scsi" target=11 lun=0;
#name="sgen" class="scsi" target=12 lun=0;
#name="sgen" class="scsi" target=13 lun=0;
#name="sgen" class="scsi" target=14 lun=0;
#name="sgen" class="scsi" target=15 lun=0;
device-type-config-list="changer";
inquiry-config-list= "ADIC","*";
-----------------------------------------