Filter
Top Products
Installing VolServ
601351 Rev A Post Installation Tasks 3-17
Post Installation
Tasks
Updating the
License String
After installation, you may need to update a license string or
subsystem configuration. The same utilities invoked by the
installation script are used to make these updates; therefore, the
procedures (after invoking the utilities) follow those shown in
the installation script.
The utility for updating a license string is
$VS_DIR/util/change_license.
Step 1. Log in as vsadm.
Step 2. Enter the following to run the utility and update the
license string:
Configuring
Label Printers
Step 1. To change entries in the printcap file, look for the
device driver filename ttyb in the barcode label
printer entry and change it to ttya.
Or, comment-out the entire shelf label printer entry
with a # at the beginning of the line.
The following example shows entries added to the
/
etc/printcap file for the shelf label and barcode
label printers:
# su - vsadm
# $VS_DIR/util/change_license
# Seiko Printer:
#
shelflabel:\
:lp=/dev/ttya:sd=/var/spool/lpd:\
:br#9600:ms=litout,-cstopb,-icrnl: